The market of injection mold manufacturers presents eight characteristics. From the perspective of appearance, structure, use, and maintenance, how will these four characteristics affect the market of injection mold? 1. There are various types of plastic products, and different mold structures vary greatly for different types of molds, so the structural principles of molds are also different. 3. The production processes of injection mold factories also vary, and most mold structures are non-linear, changing from a single mold to different molds. 4. The possibility of problems with mold structure characteristics: Due to the current high-speed movement of injection molding molds in China, the structure of injection molding molds is gradually improving, which poses a certain challenge to injection molding mold manufacturers. In order to overcome difficulties and improve production capacity, the more complex the technology used by enterprises, the more sophisticated the operation in various aspects is required. 5. Injection mold manufacturers also have certain requirements for the structure of injection molds, such as the structural characteristics of molds, the processing accuracy of mold parts, the structural tightness of mold parts, and the positioning accuracy of molds. The mold industry needs to continue to develop. 6. The environment required for injection molding is, to a certain extent, the environment required for mold production, especially the construction level of the site is very important. This can greatly reduce the production cost of injection molds, thereby improving the technical level of injection molds. However, it should be noted that many injection molds can generate significant heat during contact and friction. If cleaned in a timely manner and put into use immediately, it will cause serious damage to the injection mold. 7. When an injection mold does not use the relevant system injection molding process, it is necessary to determine the specifications and appearance, and to reproduce the correct specifications. For example, the shape is usually processed using blocks rather than grinding. When fixing the mold, it is necessary to calculate the specification dimensions, so the label dimensions must be milled out first. The first mold should be the reference plane, and the position dimensions should match the reference plane of the injection mold. After fixing the injection mold, there must be sufficient machining allowance between the template and the injection mold reference plane. After fixing the mold panel, the injection mold also needs to be tested and protected. If the injection mold is repeatedly used, and the injection mold becomes soft due to the heat generated by its dead weight and demoulding performance, a fixing method can be used. If the injection mold is pulled by hand or with a push rod, and if there is no force, the body will expand, causing deformation. As long as the mold size is adjusted, the injection mold can be fixed. When using the above method to fix an injection mold, as long as the size of the mold is adjusted, the phenomenon of burr deformation can be avoided. These methods can prevent plastic parts from deformation and improve the quality of plastic parts< eod>。