What are the advantages of plastic injection molds? Below is a detailed analysis for everyone. Mold: (1) Related to the material of the part body, such as plastic, glass, metal, organic materials, etc; (2) Plastics: mainly including: PP, PE, PS, ABS, PMMA, PC, antistatic materials, such as food trays, steam

Injection molding mold: Injection molding mold, also known as in mold assembly, is mainly produced by using liquid discharge in the gap. For example, when manufacturing a product of the same specification, select an oil hole of up to 310 milliliters.
When the piston is at the bottom, the hydraulic system is injected with hydraulic oil by a compensation oil pump. Under inlet pressure, gas enters the membrane chamber through the inlet intake valve, and the reverse membrane is pushed to the bottom of the membrane chamber. The membrane chamber is filled with gas. When the crankshaft rotates, the piston moves from the bottom to the top, and the pressure of the hydraulic oil system increases. When the hydraulic oil pressure reaches the compressed gas pressure.
After pressing on the easy to pull cover or aluminum cover, place it into the rolling head, gently press the handle up and down until the rolling head is tightened, and (without excessive force) release the handle to restore its original position. Use three fingers to check that the bottle cap is not loose. 2、 If the first capping is not tight or smooth, adjust the rolling head. Rotate clockwise to loosen it, and counterclockwise to tighten it. 3、 Open.
The principle of a die casting machine is to use high pressure to melt metal into a mold and rapidly solidify and cool it to form a die casting.
The development of die casting technology and the continuous development of the national economy have put forward higher requirements for molds, as well as higher special properties such as strength, toughness, hardness, wear resistance, thermal stability, and fatigue resistance for mold materials. These properties have a significant impact on mold life, performance, quality, and service life< eod>。